FLYBOX
Operating Instructions
REV 1.0
17
®
APR1- User Manual,
Safety Instructions and Warning Booklet
Working Mode: the Modes can be
- CSPD > Constant Speed mode, available in all 4 APR1
models. Go to chapters 4.3.1 and 5.1 for a full description.
- ADV > Advance mode, available in all 4 APR1 models.
Go to chapters 4.3.1 and 5.2 for a full description.
- ADV+ > Advance Plus mode, this function is available
in models APR1-M-LC (MAP - low current) and APR1-M-
HC (MAP - high current) only. Go to chapters 4.3.1 and 5.3
for a full description.
RPM bar and pointer: It graphically represents how the
controller is working to keep the set RPMs.
AIR speed unit: Shows the currently selected unit of
measurement for speed indication.
AIR speed indication: Shows the current Air Speed
Indication.
Travel Limit Indication: This indicator can show when
the pitch of the blades is in one of the 2 extreme positions.
For all intermediate positions, this indicator is o.
Target RPM: The RPM shown here are NOT the actual
RPM of the engine. They represent only the desired RPM
at this stage of ight, whether set by the pilot (CSPD
mode) or derived from the automatic modes (ADV and
ADV+).
To Next Page
Loading...