Flybox APR1 - IAS Setup

FLYBOX
Operating Instructions
REV 1.0
29
®
APR1- User Manual,
Safety Instructions and Warning Booklet
4.3.5 IAS Setup
Back: conrm to go back to previous
menu.
Exit: conrm to go directly to the main
screen.
Unit: select to choose the unit of the speed among Km/h,
Kts, Mph.
Speed win: this value estabilishes the width of a speed
window, centered on the istantaneous speed the aircraft
has when the manual target RPM change request occurs.
When you rotate the knob to change RPM from the current
target RPM in ADV or in ADV+ mode, the controller
automatically switches to CSPD mode and stores the
istantaneous aircraft speed in memory.
If during the ight, the aircraft speed exit this window, the
controller automatically returns to the selected ADV or
ADV+ mode.
In the example in the next page, the speed at the time of
the target RPM change was 200 Km/h.
The APR1 then stores the detected istantaneous speed of
200 Km/h and establishes a window of 40 Km/h, placing
the upper and lower limits at +20 and -20 Km/h. The
default Speed win is 50 Kp/h.