Flybox APR1 - About

FLYBOX
Operating Instructions
REV 1.0
35
®
APR1- User Manual,
Safety Instructions and Warning Booklet
To activate the Logger choose “Yes” from the Main
Menu>Logger. The icon will turn green when the le is
being written and red when the Logger is enabled but the
USB pen drive is not connected.
To stop logging, the preferred way is to choose "NO" from
the Main Menu>Logger.
However, logging is saved even if you switch o the
instrument directly, but you may lose the last recorded
events.
The Logger function automatically returns to NO when the
instrument is switched o, so it must be enabled as often
as necessary.
To send the Logger data to your installer, the best thing to
do is to zip and send it by email.
4.7 About
Enter to see instrument information.
About page example