Doc No: OMM50002312
Rev: C Page 48 of 54
Subject to contractual terms and conditions to the contrar
y, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced
, disclosed, or made public in any manner prior to express written authorization by FMCTI.
15.0 Ordering Parts
Service parts are available through FMC's worldwide network of distributors or from the
original supplier for the equipment that the pump is a component of. If unsure where to
purchase parts, contact FMC customer service for the location of an authorized parts
retailer in your area.
Always insist on genuine FMC replacement parts.
Use the assembly drawing and bill of material included with this manual to determine
the components and corresponding part numbers required to service the pump. Make
sure that the part number on the drawing or bill of material matches the part number of
the pump requiring parts.
When placing orders for parts, always reference the part number and serial number of
the pump. These numbers can be found stamped on the metal name tag affixed to the
power end of every pump. By referencing these numbers you can ensure that the
components you receive work as intended with your pump.
Be sure to inquire about any special service tools or complete maintenance kits.
To Next Page
Loading...