Doc No: OMM50002312
Rev: C Page 52 of 54
Subject to contractual terms and conditions to the contrar
y, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced
, disclosed, or made public in any manner prior to express written authorization by FMCTI.
17.0 Reference Information
Use the following section to record key information about your specific pump model.
Information such as part and serial numbers will be needed when ordering service
parts. This data may be found stamped on the metal nameplate located on the pump
power frame. This area may also be used to make notations about special parts,
procedures, phone numbers, or other important information related to your pump.
Pump Model ________________________________________
Part Number ________________________________________
Serial Number ________________________________________
Rated Pressure ________________________________________
Rated Capacity ________________________________________
Rated Speed ________________________________________
Notes:
To Next Page
Loading...