DIMENSION
User
manual
4.4
. Remote control
Dimension is equipped with the
CEC
(Consumer Electronics Control]
protocol
If
your
TV
is
equipped with this
function, enabling this function will allow
you
to
control your sound
bar
with your
TV's
remote
control
The
name
used
for
the
CEC
protocol may vary from one
TV
manufacturer
to another.
Universal and learning remote controls can be
programmed
to control Dimension.
If
required,
you
can find the
infrared
command
codes on
the
Dimension sound
bar
webpage on Focal's website: www.focalcom.
If
your
TV
isn't equipped with
the
CEC
function,
or
if
you
don't
use
a universal remote control, a remote control is
supplied with Dimension. The remote control
uses
the
same
layout
as
the
touchscreen
on
the soundbar.
Standby/ON
Volume control
Bass level setting
In put selector
Audio-Video Synchronisation
(Lip-sync)
NIGHT
mode
Turns
on
display light
Before using the remote control, remove the plastic tab from the remote control's battery
compartment.
To
change
the
batteries
on your remote control, open
the
battery
compartment
and replace with an identical battery type:
CR2025.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
