7
The iTrack Dock uses renowned Focusrite analogue mic pre-amps, with over 105 dB of dynamic
range. 48 V phantom power is available to power the CM25B, or other studio quality condenser
microphones. The dedicated instrument input allows direct connection of an electric guitar or bass,
including those with high-output pickups.
iTrack Dock is fundamentally a two-channel device, so stereo line level sources such as synths, drum
machines and CD players can be connected, whether they have balanced or unbalanced outputs.
iTrack Dock is also equipped with a USB MIDI port, allowing you to connect it to Class Compliant
USB MIDI controllers of various kinds. This permits other music apps – such as sample libraries
and synthesisers – to be played by a MIDI-equipped keyboard or pad-based controller. Novation’s
Launchkey and Launchpad apps are available to you to download and use once you have registered
the product.
Box Contents
You should find that your iTrack Dock Studio Pack comprises:
• iTrack Dock audio interface
• 12 V 1.5 A DC Universal power supply (PSU), with UK, EU and US adaptors
• Rubber mat for use with thin-profile iPad devices
• iTrack Studio CM25B condenser microphone
• iTrack Studio HP60B headphones
• XLR microphone cable (3 m)
• Fold-out “Getting Started Guide”
• Product registration card, providing download access to the following Focusrite and Novation
apps:
- Launchkey
- Launchpad
- Tape
Docking your iPad
The iTrack Dock’s bay is designed to accept both “full-size” iPads and smaller form-factor devices
such as iPad minis. The only electrical connection between the dock and the iPad is the male
Lightning™ connector on the left-hand side of the bay. You will note that this connector can be
moved vertically up and down a slot; this is because of the different sizes of iPads supported, and the
consequent difference in mating connector location.
iPads and iPad minis also differ in thickness; for this reason we have supplied a rubber mat to
support the thin-profile devices (iPad mini, iPad mini with Retina display, iPad Air).
To connect your iPad to the iTrack Dock, simply place it in the docking recess – with or without the
mat as necessary - and align the Lightning connector with the socket on the left-hand side of the
iPad. Gently engage the iPad’s socket with the connector – don’t force it!
Power considerations
The iTrack Dock is powered by the separate 12 V DC PSU supplied with the unit. While your iPad
is docked, it will be both powered and charged from the iTrack Dock, provided the iTrack Dock is
switched on.
To Next Page
Loading...
Need help?
General
