Focusrite Saffire PRO 40 - Saffire PRO 40 Troubleshooting Guide

27
DIGITAL I/O
• S/PDIF input and output (RCA phono) on rear panel, (24-bit, 44.1 - 96kHz) Output transformer isolated.
• ADAT In / Out 8 channels (44.1 / 48kHz), 4 channels S-MUX (88.2 / 96kHz).
• ADAT Input / Output can be re-configured to be optical S/PDIF input / output via control panel.
MIDI I/O
• 1 in / 1 out on rear panel.
FIREWIRE S400
• 2 ports.
POWER
• Internal Universal Input PSU. 90-250Vac
HEADPHONE MONITORING
• 2 x 1/4 inch TRS Jack on front panel (mirrors outputs 7-8 and 9-10).
• High power headphone drivers.
FRONT PANEL INDICATORS
• Metering of analogue inputs (channels 1-8), 5 segment (-42, -18, -6, -3 and 0dBFS).
• ‘Lock’ Indicator.
• ‘FW Active Indicator.
• MUTE switch and LED.
• DIM switch and LED.
• 48V switches and LEDs.
• Inst switches and LEDs.
• Pad switches and LEDs.
• Power switch and LED.
Troubleshooting
For all troubleshooting queries, please visit the Focusrite Answerbase where there are articles covering numerous troubleshooting
examples. www.focusrite.com/answerbase.
E & O.E.