20 REF4P, REF5P and REF5BBP-T Undercounter Refrigerators
High and low temperature display
From the home screen touch the temperature display in the upper right
corner. The high/low temperatures will appear below the temperature
display. To the left of the high/ low temperature a time and date stamp
will be displayed.
Reset the high and low temperatures
Touch the temperature display a second time and the reset function
will appear under the high and low temperature. Touch the reset icon and
a yellow message box will appear. Press
to conrm reset or to
cancel.
Alarm set point display
From the home screen touch the temperature display three times. The
High and low alarm set point will appear under the temperature.
Fig. 27
Fig. 28
Help
§ Help is available at any time by touching the icon at the bottom
of the screen.
§ Help is screen-specic; touching the icon will display an
explanation of the functionality and use of the screen you are
currently viewing.
§ Touch
to exit help screen.
Fig. 29
Settings
§ Refrigeration Set Point
– Touch the number displayed in the box to the right of the Set
point label and use the keypad or UP and DOWN arrows to
select product temperature between 1 C (36 F) and 10 C (50 F).
Press
to accept or to cancel.
§ Sleep Temperature Display
– Toggle ON to hide the temperature reading immediately on the
home screen.
§ Set the Sleep Delay
– To automatically hide the temperature after 0-600 seconds of
inactivity, touch the box to the right of the delay (0-600) box. Use
keypad or UP and DOWN arrows to select from 0-600.
§ Temperature
– Toggle between F and C to select Fahrenheit or Celsius.
§ Brightness
– Touch the number displayed in the box to the right of the
Brightness icon and use the keypad or UP and DOWN
arrows to select from 1-10. Press to accept or to cancel.
Fig. 30
38.4 F40 F
Advanced Settings
F
C
F
C
Set point 38.0 F
System Info
Brightness
delay (0 - 300)
ON
3 seconds
OFF
5
Fig. 31
Advanced Settings
delay (0 - 300)
ON
3 seconds
OFF
F C
F
C
Set point 38.0 F
2
5
8
0
1
4
7
3
6
9
#
*