Follett T400A - Specifi Cations

5
UP
UP
CAUTION
• Check start relay before supplying power
• Start relay is gravity sensitive, and MUST be in “up” position
• Failure to comply may cause equipment to overheat, resulting in equipment failure, equipment damage or fire hazard
UP
top mount and
RIDE model position
freestanding
position
Speci cations
Electrical
Each ice machine and dispenser require a separate circuit with electrical disconnect within 10 ft (6m).
Equipment ground required.
Standard electrical – 115V, 60Hz, 1 phase.
Maximum dispenser fuse – 15A,
Maximum ice machine fuse – 20A each
Maximum ice machine amperage – 11A each
Cord and plug provided on ice machine and dispenser
Model Electrical connection Circuits required
25FB400A/W, 50FB400A/W, 110FB400A/W cord & plug provided 115/60/1, 20A max. fuse size
25CT400A/W, 50CT400A/W, 110CT400A/W cord & plug provided 115/60/1, 20A max. fuse size
25CR400A/W, 50CR400A/W, 110CR400A/W dispenser, ice machine 115/60/1, (2) circuits required
and bin signal: dispenser: 15A max. fuse size
cord & plug provided ice machine: 20A max. fuse size
VU155R400A/W, VU300R400A/W dispenser, ice machine 115/60/1, (2) circuits required
VU155BR400A/W, VU300BR400A/W and bin signal: dispenser: 15A max. fuse size
VU155R400A/WX, VU155BR400A/WX cord & plug provided ice machine: 20A max. fuse size
VU155NR400A/W, UD300R400A/W dispenser, ice machine 115/60/1, (3) circuits required
VU155R800A/W, VU300R800A/W, and bin signal:
VU155R800A/WX, cord & plug provided dispenser: 15A max. fuse size
VU155BR800A/W, VU300BR800A/W, (2) ice machines: 20A max. fuse
VU155R800A/WX size each
Electrical connections