19
● The time, date, memory deletion function and alarm function can ONLY be
changed in the setting mode. Therefore, during glucose testing, those param-
eters cannot be charged.
● The meter cannot automatically update daylight saving time. You have to
manually adjust the time in the meter according to the procedures. Please
make sure the meter matches the time zone and adjust the daylight saving time
data if required.
● Your meter displays 7-, 14-, 21-, 28-, 60- and 90-day averages which you can
access from the meter memory. These averages are calculated from results
obtained during the 7-, 14-, 21-, 28-, 60- and 90-day preceding the current date
and time settings. When the date and time are changed, the 7-, 14-, 21-, 28-,
60- and 90-day averages may change.
● While the meter is in the setting mode, it will turn off automatically without any
action in three minute.
NOTE
To Next Page
Loading...
