44
8 Disassembly and repair
All steps that involve opening the machine and/or investigating internal components
should be done by skilled persons under the guidance of Formlabs Support or a
certified service provider. Any damage resulting from attempting disassembly and/
or repair without prior authorization from Formlabs Support or a certified service
provider is not covered by warranty.
8.1 Tasks
Contact Formlabs Support or a certified service provider to receive repair instructions and
authorization, including how to disassemble or remove the exterior paneling.
Task Frequency
Replacing the HEPA filter When advised by Formlabs Support or a certified
service provider
Replacing the media filter mesh When advised by Formlabs Support or a certified
service provider
Replacing the blasting chamber door window When advised by Formlabs Support or a certified
service provider
Replacing the blast gloves When advised by Formlabs Support or a certified
service provider
Replacing the blast gun nozzle When advised by Formlabs Support or a certified
service provider
Any other maintenance or repair tasks not listed in section 6 Maintenance requires servicing
the machine. Contact Formlabs Support or a certified service provider to request in-field
service or an RMA (short for “return to manufacturer authorization”).
WARNING
To Next Page
Loading...
