FORST TR8D - 5.8 Hydraulic Oil Filter; 5.6.1 Removal and Replacement

Page 30
5.8 Hydraulic Oil Filter
Use protective plastic gloves to keep oil off skin, dispose of oil and filter in an
environmentally responsible manner.
5.6.1 Removal and Replacement
1. The filter housing is
accessed via the left
side panel. Clean
around filler housing
before removing to
help prevent debris
getting into oil.
2. Unscrew filter housing
body, remove filter
element and allow to
drain for 15 minutes
before disposal.
3. Screw on and tighten
filter body with new
filter into filter housing
Item
Description
Qty
1
Complete Filter
1
2
Filter Element
1
3
3a
3b
3c
3d
3e
3f
Seal Kits
O-ring for filter
element
O-ring for housing
Anti-extrusion ring
Gasket
O-ring
Protection seal
1
1
1
1
1
1
1
4
Indicator plug
1