Page 5
1.0 Introduction
Thank you for becoming the owner of this Redwood Global Ltd, Först TR8D wood
chipping machine. By observing the contents of this manual, we hope the chipper
gives safe and productive service. This user manual is intended for the
owner/operator to safely and effectively operate this chipper and carry out routine
maintenance between services. This is not a comprehensive service manual. See
Service Schedule for routine maintenance and when to take the chipper to a service
specialist. For engine maintenance, please refer to the engine manual supplied with
this chipper.
This chipper has been through a pre-delivery inspection before leaving the factory
and is ready to use.
Also, damage to property and this chipper may occur. Please observe and obey all
warning signs (decals) located on the chipper. Their meaning is covered in this
manual under decals.
All personnel working with this chipper must be adequately trained in its use and
most importantly, follow the advice on safe working practices.
Redwood Global Ltd endeavour to continuously develop and improve its products.
They reserve the right to make changes at any time, without notice or incurring any
obligation.
Continuous improvement will affect chipper design and production so there may be
minor discrepancies between the actual product and this manual.
This manual must remain with the chipper for reference by operators and includes
hiring or if the chipper is resold.
Before use and as a minimum, the safety and chipper operation
sections covered in Chapter 2 be read and understood. Failure to
do so could result in serious injury or loss of life to the operator
and others nearby.
To Next Page
Loading...
