122 Fortinet Inc.
Changing system options System configuration
9 Select Apply.
Figure 1: Example date and time setting
Changing system options
On the System Config Options page, you can:
• Set the system idle timeout.
• Set the authentication timeout.
• Select the language for the web-base manager.
• Modify the dead gateway detection settings.
To set the system idle timeout
1 Go to System > Config > Options.
2 For Idle Timeout, type a number in minutes.
3 Select Apply.
Idle Timeout controls the amount of inactive time that the web-based manager waits
before requiring the administrator to log in again.
The default idle time out is 5 minutes. The maximum idle time out is 480 minutes
(8 hours).
To set the Auth timeout
1 Go to System > Config > Options.
2 For Auth Timeout, type a number in minutes.
To Next Page
Loading...
