4.6.8.1 Back-up & Restore
Click Backup to save all the parameters you have set. These parameters will be stored in a bin file for future
use.
Click Browse and select the parameters file you have stored, then click Submit to restore the restore the
parameters.
4.6.8.2 System Upgrade
Click Download the Latest Firmware, you will see the following screen. And click Save to save the firmware
on your computer locally.
Your current firmware version will be displayed on your screen. You may go to the Status > Device
Information page to check for the latest firmware versions available.
Click Browse, choose the correct bin file and then click System upgrade.
Don't shut down the power during upgrade. After upgrading, you can see the upgrade result.
Upgrade Firmware by Equipment Search Tool
Double click the IP Camera Tool shot icon , select the Camera IP that you want to upgrade the firmware.
Then select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade.
To Next Page
Loading...
Need help?
General
