WWW.FOSCAM.COM FI8608W User Manual
Click here
Figure 3.6
Set the same subnet
mask and gateway of
your camera with your
PC
There are two DNS servers, you can set the
same for your camera. Same with gateway is
also OK.
Figure 3.7
If you don’t know the DNS server, you can use the same settings as the default Gateway.
HTTP Port number: Usually, it is 80. You can set any number between 1024 and 49151 too.
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
25
To Next Page
Loading...
