WWW.FOSCAM.COM FI8918/FI8918W User Manual
Figure 3.28
3.13 PTZ Settings
Here you can set pan/tilt speed. Normally, PT speed is 0; the camera will rotate most quickly.
The larger setting number, the lower speed.
Figure 3.29
3.14 Upgrade Device Firmware
When you upgrade the camera, please upgrade system firmware first and then upgrade Web UI.
Figure 3.30
NOTE: After you upgrade the system firmware, you will not view the camera in browser before
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
32
To Next Page
Loading...
