3
30
Smart BIOS
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
-
vents user without password trying to get into your computer through smart boot menu.
This item displays the current CPU speed.
This item displays the current Front Side Bus clock.
This item displays the current CPU Ratio.
This item displays the current DRAM Speed.
System Status Power LED Status Stop Blinking Condition
Normal Always On Always On
No Memory Continue blinking On (1sec.), Off (1sec.) Reboot & Memory OK
Post Error Message
Quick blinking twice (1/3sec. On, 1/3sec. Off),
one long On (1sec.), continuously.
Enter Setup or Skip
Smart BIOS
Current FSB Speed : 1333MHz
Disabled
Current DRAM Speed : 800MHz Enabled
F9:Optimized Defaults
Options
To Next Page
Loading...
