Installation Precautions
Please carefully read the following procedures to install your computer :
to the motherboard and CPU due to high temperature. Never turn on the
computer if the CPU fan is not properly installed.
CPU is overclocked. Normal operation depends on the overclocking capac-
ity of your device.
S/PDIF cables to the internal connectors on the motherboard, make sure
their pinouts are matching with the connectors on the motherboard. Incorrect
connections might damage the motherboard.
-
tors.
recommend using a 24-pin ATX power supply to get the best performance.
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
CAUTION
!
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
CPU, memory, expansion cards or other peripherals. It is recommended to
unplug the AC power cord from the power supply outlet. Failure to unplug
the power supply cord may result in serious damage to your system.
W
A
R
N
I
N
G
!
To Next Page
Loading...
Need help?
General
