Foxconn G41MD Series - Page 47

3
39


This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.

This item is used to enable or disable the Universal Host Controller Interface for USB.

This item is used to enable or disable the Enhanced Host Controller Interface for USB.


     Help Item
Module Version - 2.24.3-13.4 Enables support for
legacy USB. AUTOAUTO
USB Devices Enabled : option disables
None legacy support if
no USB devices are
Legacy USB Support connected.
     
USB 2.0 Controller   

F9:Optimized Defaults
