3
20
System Information
This sub-menu is used to set up the standard BIOS features, such as the date, time, oppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
► Time (hh:mm:ss)
This item allows you to congure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a eld. Use [+] or [-] to input the value.
The three elds of the setting are <hour> : <minute> : <second> respectively.
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a eld. Use [+] or [-] to input the value.
► SATA PORT 1/2/3/4
While entering setup, BIOS automatically detects the presence of SATA devices, and you can
enable or disable the related mode and technology for the relevant device. This item displays
the drive information of SATA devices.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors]: All errors can result in system halt.
[No Errors]: No errors can result in system halt.
[All, But Keyboard]: All errors but keyboard can result in system halt.
► Model Name
Model name of this product.
► BIOS Version
It displays the current BIOS version. User can check this information and discuss with the eld
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
System Information
Time (hh:mm:ss) [18:38:41] Help Item
Date (mm:dd:yy) [Thu 10/22/2009]
Use [Enter], [TAB]
► SATA PORT1
[Not Detected] or [SHIFT-TAB] to
► SATA PORT2
[Not Detected] select a eld.
► SATA PORT3 [Not Detected]
► SATA PORT4 [Not Detected] Use [+] or [-] to
change system Time.
Halt On [All, But Keyboard]
Model Name : M61PML/M61PML-K
BIOS Version : AC1F1B06
BIOS Release Date : 01/05/2011
CPU Name : AMD Engineering Sample
Total Memory SIze : 1024MB
MAC Address : 0C-EE-E6-FF-FF-CC
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
21
To Next Page
Loading...
Need help?
General
