5
70
2. Depending on which platform your XP
system is, normally, it is a 32-bit system.
Use Windows explorer, and go to CD:\
Driver\NVIDIA\MCP61\Chipset\WinXP\
32bit\IDE\WinXP\sataraid, click on
RaidTool icon to start the creation.
3. Click "GO" to start.
4. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click "OK" to continue.
5. Insert a diskette, click "OK" to continue.
6. You can input a volume label for this
diskette, click on "Start" to format.
5-1 Create RAID Driver Diskette
If you want to install a brand new Windows XP on a RAID system, you need to create a
RAID driver oppy diskette which will be used during Windows XP installation later.
1. Find a PC, put a diskette into its oppy drive A:, this diskette will be formatted later.
Put the driver CD into your DVD-ROM drive .
To Next Page
Loading...
Need help?
General
