7. After PC starts, the RAID array is now ready to be initiali�ed under Windows.
Launch Computer Management by clicking Start -> Settings -> Control Panel then
open the Administrative Tools folder and double click on Computer Management.
Click Disk Management (under the Storage section).
The Initiali�e and Convert Disk Wi�ards appears. Click "Next" to continue.
The RAID array is named as Disk1 and its status is unknown and not Initiali�ed.
8. A "Select Disks to Initiali�e" window will appear. The disks listed depend on how
many arrays you have congured. Select "Disk1" and click "Next" to continue.
9. When "Select Disks to Convert" window appears, do not select anything and click
"Next" to continue.
10. When the "Completing the Initiali�e and Convert Disk Wi�ard" window appears,
click "Finish" to complete the wi�ard.
To Next Page
Loading...
Need help?
General
