1. Find a PC, put a diskette into its oppy
drive A:, this diskette will be formatted
later. Put the driver CD into CD-ROM
drive, when the screen appears, click on
"Utility" icon, then click on "Create RAID
Driver Floppy" icon.
2. A message pops out telling you where to
nd the routine in driver CD to create the
driver diskette.
3. Depending on which platform your XP
system is, normally, it is a 32-bit system.
Use Windows explorer, and go to CD:\
Driver\NVIDIA\MCP73\Chipset\WinXP\
32bit\IDE\WinXP\sataraid, click on
RaidTool icon to start the creation.
4. Click "GO" to start.
5. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click "OK" to continue.
5-1 Create a RAID Driver Diskette
If you want to install a brand new Windows XP on a RAID system, you need to create a
RAID driver oppy diskette which will be used during Windows XP installation later.
To Next Page
Loading...
Need help?
General
