This chapter tells how to change system settings through
the BIOS Setup menus. Detailed descriptions of the BIOS
parameters are also provided.
You have to run the Setup Program when the following cases
occur :
1. An error message appears on the screen during the system
Power On Self Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :
■ Enter BIOS Setup
■ Main Menu
■ System Information
■ Fox Central Control Unit
■ Advanced BIOS Features
■ Advanced Chipset FeaturesAdvanced Chipset Features
■ Integrated PeripheralsIntegrated Peripherals
■ Power Management SetupPower Management Setup
■ PC Health StatusPC Health Status
■ Load Optimized DefaultsLoad Optimi�ed Defaults
■ Set Supervisor PasswordSet Supervisor Password
■ Set User PasswordSet User Password
■ Save & Exit Setup
■ Exit Without Saving
Since BIOS could be updated some other times, the BIOS information described
in this manual is for reference only. We do not guarantee the content of this
manual will remain consistent with the newly released BIOS at any given time in
the future. Please visit our website for updated manual if it is available.
To Next Page
Loading...
Need help?
General
