TECHNICAL HELP
& SPECIFICATIONS
TECHNICAL HELP
& SPECIFICATIONS
PUTTING THE “HD”
INTO MYSTAR HD
PERSONALISING
YOUR MYSTAR
YOUR PLANNER
WATCHING YOUR
RECORDINGS
RECORDING
WITH MYSTAR
HOW TO FIND
YOUR MYSTAR
REMOTE CONTROL
MYSTAR – WHAT’S
CONTENTS
TECHNICAL HELP
& SPECIFICATIONS
71/81
Product compliance
This symbol indicates ‘Dangerous voltage’ in MyStar. It represents the risk of electric shock or bodily injury.
Your product complies with the Australian Electrical Safety standard AS/NZ 60065: 2003.
DDP060AUS/T500 – The C-Tick symbol and C-Tick number (N10406) printed on MyStar guarantees that
your product complies with the Australian EMC standard AS/NZ CISPR 13: 2004
Manufactured under License from Dolby Laboratories “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorised by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorised by Macrovision. Reverse engineering or
disassembly is prohibited.
To Next Page
