Foxwell NT500 - Page 37

NT500 VAG Scanner User’s Guide_English Version_V1.00
37
Figure 4-56 Sample Oil Service Menu Screen
3. Select Service Reset. The scan tool displays as below. When more than 3 function keys display,
use the left and right arrow keys to select a command and press the ENTER key to confirm.
Figure 4-57 Sample Oil Reset Screen
4. If the value does not need to be changed, use Back key and return to the maintenance menu. If
the appropriate service has been carried out and the value requires inputting, press function
key Input. The number displayed is the recommended value by the factory. This value can be
changed by pressing Single or Reset. The screen for new channel value entry displays as
below.
Figure 4-58 Sample New Channel Value Input Screen
5. Input a valid channel number and use the function key Finish to confirm.