Foxwell T2000 - Page 23

23
T2000 TPMS Service Tool Manual_English_V1.01
Figure 5-25 Sample Programming Screen
5.3.2 Clone By Activation
The Clone By Activation function lets users automatically write in the retrieved original sensor data
to the Foxwell Sensor which is used after the original sensor is triggered.
To Clone by activation:
1. Highlight TPMS from the Main Menu and select the vehicle model as need.
2. Select Programming--Clone by Activation from the available menu.
3. Place the tool near the original sensor to be copied and press Activate to continue.
4. After trigger successfully, press Y to continue.
Figure 5-25 Sample Activation Screen
5. Place a new Foxwell sensor near the TPMS tool (around 0-20 cm).