Frama Matrix F22
38
7.1.5. Start Up/Log Off
Use this key to restart the system after you have adjusted settings. Pressing Start Up/Log Off takes
you straight to cost centre selection.
7.1.6. Save Start Menu
Here you can save a Start Menu as the default. The Start menu saved will automatically be preset
after every restart or after a change of cost centre.
7.1.7. Change PINs
This is used for setting up cost centres in Admin mode or for changing the PIN and name of the
current cost centre. Please read page 43 et seq. for more detailed information.
7.1.8. Reset Counters
Please read page 43 et seq. for more detailed information.
To Next Page
Loading...
