Frama Matrix F22
53
12. EC-Declaration of Conformity
in accordance with the EEC low-voltage directive 2014/35/CE in accordance with appendix III B;
of 26. February 2014
Hereby we explain that those corresponds to below designated products in its conception and
design as well as in circulation the execution the fundamental safety and health requirements of the
Community directive low-voltage brought by us. In the case of a change of the product not co-
ordinated with us this explanation loses its validity.
Manufacturer:
Frama AG
Dorfstrasse 6
CH-3438 Lauperswil
Description of the electrical equipment:
Product name: Matrix F22
Type: Franking system
The agreement with further valid guidelines/regulations following for the product is
explained:
EMC Directive (2014/30/CE) of 26. February 2014
Reference to the harmonised standards:
EN 60950-1:2006/AC:2011
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:2015
EN 55022:2010
EN 55024:2010 + A1:2015
EN 61000-6-1:2007
EN 61000-6-3:2007 + A1:2011
EN 61000-3-2:2014
EN 61000-3-3:2013
Lauperswil, October 1, 2017
Thomas P. Haug
CEO
To Next Page
Loading...
