Filling and emptying
Page 25
Milk
NOTICE
For notes on cleaning the milk
system, see Chapter «Care of
the A1000».
The milk system is prepared semi-automatically after a cleaning or a fi lling procedure.
Please observe the instructions in the error event messages.
Access to the error event messages is through the dashboard and requires no login.
Preparing the milk system
Filling the refrigeration unit
Drink quality
Incorrect handling of milk can lead to quality problems.
•Pour milk only into clean containers.
•Use only pre-cooled milk (2 - 5 °C or 36 - 41°F).
•Touch the inside of the milk container and the milk lid only after
sanitizing your hands, or wear disposable gloves.
Close the door.
Slide the milk container fully
into the cooling chamber.
Push the sliding cover to the
rear. Fill the milk container with
cooled milk.
Sliding cover
Pull out the milk container only
until the sliding cover of the
container lid is fully visible.
Switch the refrigeration unit on.
The current cooling chamber
temperature is displayed.
Open the door.
To Next Page
Loading...
Need help?
General
