LGT100 Rev0309
33
Figure 13.  Raised Pole Warning Switch Housing Locations
Description
Specications
Switch
Contact  Single Pole Single Throw (SPST)
Position  Normally Closed (NC)
Current  0.25 AMPS
Power   3 WATTS
CAUTION: If the switch is to be used with a higher current application a relay 
must be provided to avoid switch failure.
Indicator
Type    1891
Voltage  + 14 VDC
Current  0.25 AMPS
Switch Housing Locations
If the switch housing is removed during installation, care should be taken to remount 
the switch in the correct position. Raise and lower the pole and ensure that the switch 
opens and closes correctly.
Models 540, 542
Side Mount
Pull-Up Pole
Models 510
Top Mount 
Pull-Up Poles
Models 530
Side Mount 
Push-Up Poles
Models 512
Thru-The-Roof 
Push-Up Poles