Fremco MicroFlow TOUCH - Display Symbols (Touch)

P a g e | 13 of 40
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TELEPHONE +45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
10.1. DISPLAY SYMBOLS
Start
Indicates machine is running
Book-service
Info: it is time to book an
authorized service check
Forward
Motor direction, press to
toggle between forward and
reverse
Set
Press to go to setup page
Reverse
Motor direction, press to
toggle between forward and
reverse
Setup
Press to set stop length.
Not active if value is “0”
Speedometer
Motor speed
Confirm
Press to confirm info and
return to main page
Torque
Motor torque
Torque
overload
Info when machine is
stopped by the torque
overload system
Meters
Actual values for length,
speed and torque
Fiber protection
Info when machine is
stopped by the fiber
protection system
Pre-set
Pre-set values for length,
speed and torque
Stop
Info when machine is
stopped, e.g. fiber or torque
stop
Ramps
Motor acceleration/
deceleration ramp functions
Reset
Resets meter counter
Home
Press to return to main
window
Login
Log in to a service info page
(login is required, and only
for service personnel)
Maintenance
Info: it is time for
maintenance
Close page
Press close service info and
return to main window