P a g e | 39 of 40
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TELEPHONE +45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
14. EC DECLARATION OF CONFORMITY
Manufacturer:
Fremco A/S
Ellehammervej 14
DK-9900 Frederikshavn
Denmark
We hereby declare that
101-10051 MicroFlow TOUCH/101-171001001 MicroFlow LOG for microfiber cables 0.8-
6.5 mm
from Serial No. 9328.2294
Is manufactured in conformity with
EC Directives:
2006/42/EC – the Machinery Directive
The directive has the dual aim of harmonising the health and safety requirements applicable to machinery on
the basis of a high level of protection of health and safety, while ensuring the free circulation of machinery on
the EU market.
2014/30/EU - Electromagnetic Compatibility (EMC) Directive
The directive ensures that electrical and electronic equipment does not generate, or is not affected by,
electromagnetic disturbance.
2014/35/EU – The Low Voltage Directive
The directive ensures that electrical equipment within certain voltage limits provides a high level of protection
for European citizens, and benefits fully from the Single Market
International standards:
DS/EN ISO 12100:2011- Safety of machinery
The standard specifies basic terminology, principles and a methodology for achieving safety in the design of
machinery. It specifies principles of risk assessment and risk reduction to help designers in achieving this
objective
European standards:
DS/EN ISO 4414:2010 - Pneumatic fluid power
ISO 4414:2010 deals with all significant hazards associated with pneumatic fluid power systems and specifies
principles to apply in order to avoid those hazards when the systems are put to their intended use.
Technical file responsible:
Kasper Mikkelsen
Research & Development Manager
Ellehammervej 14, DK-9900 Frederikshavn
Attested by:
Kim Lindblad Carlsen Kasper Mikkelsen
Managing Director R&D Manager
Frederikshavn, 10.07.2018 Frederikshavn, 01.07.2021
To Next Page
Loading...
