Fremco MicroFlow TOUCH - Torque Off-Set; Adaptor Plates

P a g e | 38 of 40
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TELEPHONE +45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
12. TORQUE OFF-SET
The minimum power needed to run the machine varies with the running speed of the machine. For instance,
the torque off-set at 70 m/min. is minimum 20.
Speed m/min
Torque Off-Set
10
5
20
5
30
10
40
10
50
15
60
15
70
20
80
20
90
25
13. ADAPTOR PLATES
It is important that the adaptor plates fit the actual size of the fiber cable and the microduct. Below is an
overview of the different adaptor plate components for MicroFlow.
Adaptor Plates
Drive Wheels
Inlet Guides
Gaskets for
adaptor plates
There are many different sizes of adaptor plates, suitable
for many different combinations of fiber and duct.