P a g e | 17 of 40
FREMCO A/S
ELLEHAMMERVEJ 14 | DK9900 FREDERIKSHAVN, DENMARK | VAT NO.: DK30815416
TELEPHONE +45 7230 1213 | SALES@FREMCO.DK | WWW.FREMCO.DK
Motor Ramp Setup
In this window the acceleration/deceleration
ramps during motor start/stop, can be
increased/decreased by pressing .
Press to go back to setup window
Press to go back to main window
Keypad
For entering length stop
Fiber Protection Warning
Popup window when fiber protection monitor is
activated.
Press to confirm and go to main window
Motor Torque Warning
Popup window when motor torque exceeds torque
setting.
Press to confirm and go to main window
To Next Page
Loading...
