63 PB
OPERATION
Indoor Unit Control Mode
(9) Auto re-start from power break
When the power supply is recovered after a break, all presets are still effective and the air‑conditioner can run according
to the previous setting.
How to set/cancel:
It can be set /canceled with wired remote controller.
For details, see internal control parameter adjustment.
Fault code
The fault code can be shown by LED lamps or will display on the wired controller. 2.11 Filter cleaning
FC will light up when air filter is clogged with dust.
How to set/cancel: It can be set /canceled with wired remote controller.
For details, see internal control parameter adjustment.
To Next Page
Loading...
