Friedrich SP06 - Ventilating Your Room

Ventilating Your Room
ff the air in your room is stale, you can ventilate the room using the Fan feature.
1 If you wish to discharge stale air, push the ventilation lever on the front of the
unit to the right and open position ( _ ).
Result: • The air inside the room circulates and stale air is discharged
outside.
Otherwise, push the ventilation lever to the left and closed position ( -_ ).
Result: • The air simply circulates inside the room.
If necessary, press the _ (OnlOf0 button.
• The air conditioner starts up in the mode selected when
the unitwas last used.
• The unit beeps twice.
Ifthe fan speed(F1,F2 or F3) is notdisplayedon the controlpanel:
• Pressthe (_ buttonon the unitone or more times untilthe fan speed
(F1, F2 or F3)is displayed.
Result.' • The unitbeepseachtime you pressthe (_ button.
• The air conditionerstartsup inthe Fanmode.
Youcan change modesat any time.
Whenthe airconditioneris in the Fan mode,the temperature
cannot besetor displayed.
4
iiiiiiiiiiiiiiiiiiiiiiiiiiiiii
To set the fan speed:
• Press the (_ button on the unit one or more times until the
desired fan speed(F1, F2 or F3) is displayed.
F I LOW
F _-= Medium
F 3 High
To control the direction of the air flow, refer to page 20.