Friedrich SP06 - Advanced Functions and Settings; Timer and Energy Saving Features

Setting the On Timer
The On 7_mer enables you to switch on the air conditioner automatically after a
given time. You can select the On timer only when the air conditioner is off.
The on timer will only work in conjunction with the Cool mode.
1 Check that the air conditioner has been switched off; if necessary,
press the (_)(OnlOff) button.
2 To set the operating time, press the _ button one or more times until
the required time is displayed. Possible time is between 1 hour and
24 hours inclusive.
3 Press the _ (Set/Cancel) button to complete the setting.
Result:
• The remaining time is displayed on the remote control and
the control panel.
• Blinking of the timer indicator on the remote control stops.
• The timer indicator lights up on the control panel.
• The unit beeps
• The air conditioner will switch on automatically in the cool
mode when the counter displayed on the remote control
and the control panel reaches the set time.
You can select the temperature and Energy saving mode after
setting the On timer mode.
Cancel the On Timer
Y
1 Press the _ (Set/Cancel) button.
if you want to turn on the air conditioner before the timer reaches
the setting time, press the (_) (OnlOff) button.