Fritz! Fon WLAN 7390 User Manual

158
Changing the Network Settings
3.7 Changing the Network Settings
In order to change the network settings of the FRITZ!Box,
the expert mode must be enabled in the user interface:
1. Start a web browser on your computer and enter
fritz.box
in the address field of the browser.
2. Click “Expert Mode” in the “System” menu, enable
the setting “Show expert settings” and confirm this
setting by clicking “Apply”.
Here is how to change the network settings:
1. Select the “Home Network / Network” menu.
2. Select the “Network Settings” tab.
3. Click the “IP Addresses” button.
The “IP Settings” page is opened.
4. Once all desired changes to the settings have been
configured, confirm by clicking “OK” to apply them.
Please note that changes to the network settings in the
FRITZ!Box may make it necessary to adjust the network
settings of your computers so that you can continue to ac-
cess the FRITZ!Box user interface.

Fritz! Fon WLAN 7390 Specifications

General

Brand	Fritz!
Model	Fon WLAN 7390
Category	Network Router
Language	English