66
Disabling the USB Remote Connection
Disabling the USB Remote Connection
Perform the following steps to disable the USB remote
connection:
1. Open a web browser on the computer for which the
USB remote connection is to be disabled.
2. Enter fritz.box
in the address field of the browser.
3. Enable the expert setting of the FRITZ!Box in the “Sys-
tem / Expert Mode” menu. Confirm by clicking “Apply”.
4. Open the “Home Network / USB Devices” menu.
5. Select the “USB Remote Connection” page.
6. Disable all types of USB devices.
7. As a final step, click “Apply”.
The result of the changed USB settings can be viewed in
the “Overview of Devices”.
8.8 Tips for Using USB Devices
When using USB devices at the USB ports of the
FRITZ!Box, please keep in mind the following:
• If more than one USB device without its own power
supply is connected to the FRITZ!Box, please note
that, in accordance with the USB specification, the
total current consumption may not exceed a value of
500 mA. Otherwise unspecified malfunctions with
the USB devices or even damage to the FRITZ!Box
may occur.
• AVM expressly advises against performing firmware
updates for USB devices connected to the computer
via the USB remote connection on the FRITZ!Box.
• Before removing a USB storage device, select the
“Remove safely” option in the FRITZ!Box user inter-
face to prevent losses of data.
To Next Page
Loading...
Need help?
General
