WLAN Button
125
“Info” LED Here you can define what additional information should
be displayed on the “Info” LED. For details, see the “ Sys-
tem / “Info” Display” section of the user interface of your
FRITZ!Box.
1.3 WLAN Button
The FRITZ!Box is equipped with a WLAN button.
The button has two functions:
• enabling/disabling WLAN
• establishing a WLAN Connection with the WPS meth-
od (see “WPS (Wi-Fi Protected Setup)” from
page 148)
If you hold the button down longer than six seconds,
this function will be executed. For this to work, your
WLAN adapter must support the WPS method.
To Next Page
Loading...
Need help?
General
