Call Rejection on Busy (Busy on Busy)
85
Call Rejection on Busy (Busy on Busy)
Calls for an extension can be rejected using the “busy on
busy” feature. This means that the user receives a busy
signal whenever the extension is busy.
Disabling Automatic Outside Dialing
N Pick up the handset.
r1<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
Enabling Automatic Outside Dialing
N Pick up the handset.
r1<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
Enabling Busy on Busy
N Pick up the handset.
r52<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
Disabling Busy on Busy
N Pick up the handset.
r52<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dial-
ing the sequence shown at left.
O Hang up the handset.
To Next Page
Loading...
