Fritz! Fon WLAN 7390 User Manual

90
Call-Back on No Response (CCNR) on the ISDN Line
Call-Back on No Response (CCNR) on the ISDN Line
The “call-back on no response” function can be used
when you dial a number and the party does not respond.
Once the party can be reached again and conducts a call
from her or his telephone, this function recognizes when
this conversation is ended. Your telephone then rings.
When you pick up your handset, the number of the desired
party is automatically dialed again.
“Call-back on no response” can be used both for external
and internal connections.
This command can be activated five times for each line.
Call-Back on Busy (CCBS)
M You have just dialed a number and now you hear
the busy signal.
5 If the call is not answered, within 20 seconds,
dial either the number 5
or
Rs37r the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
K As soon as the subscriber you dialed hangs up,
your telephone will ring.
N Pick up the handset. The subscriber’s number is
dialed again automatically.

Fritz! Fon WLAN 7390 Specifications

General

Brand	Fritz!
Model	Fon WLAN 7390
Category	Network Router
Language	English