76
RTD, the humidity sensor is a capacitance device), mechanical variation, or
degradation (wearing of moving parts, contamination of sensors).
Calibration is only useful if you have a known calibrated source you
compare it against, and is optional. This section discusses practices,
procedures and sources for sensor calibration to reduce manufacturing and
degradation errors. Do not compare your readings obtained from sources such
as the internet, radio, televis
ion or newspapers. The purpose of your weather
station is to measure conditions of your surroundings, which vary
significantly from location to location.
NOTE: UV Calibration MUST
be performed every 2 to 3 months to
improve results. Over time, UV Index may alter results based on bright and
strong sunlight conditions. This is why diligent UV Calibration is
recommended.
5.9 Factory reset
Figure 34: Factory Reset Screen
RTD, the humidity sensor is a capacitance device), mechanical variation, or
degradation (wearing of moving parts, contamination of sensors).
Calibration is only useful if you have a known calibrated source you
can
compare it against, and is optional. This section discusses practices,
procedures and sources for sensor calibration to reduce manufacturing and
degradation errors. Do not compare your readings obtained from sources such
ion or newspapers. The purpose of your weather
station is to measure conditions of your surroundings, which vary
be performed every 2 to 3 months to
improve results. Over time, UV Index may alter results based on bright and
strong sunlight conditions. This is why diligent UV Calibration is
To Next Page
Loading...
