Froling P2-15 - Cleaning the Pellet Burner; Checking the Thermal Discharge Safety Device

Boiler maintenance
Inspection, cleaning and maintenance
Page 34
B0190806 s
5
Cleaning the pellet burner
 Open the insulating door and
combustion chamber door
 Remove the combustion mount
 Tip the combustion mount
 The ash falls past the pellet
burner and into the ashcan
 Clean the pellet burner using the ash
scraper
 The slit must be free of ash!
Checking the thermal discharge safety device
 Check the seal of the discharge valve
 The discharge pipe must not drip
 Exception: boiler temperature > 95 °C
If water is dripping from the discharge pipe:
 Clean the discharge safety device or have
the installer replace it if necessary
Check the safety valve as per the
manufacturer’s specifications