Froling P2-15 - Fault Message Handling

Troubleshooting
Page 40
B0190806 s
6
6.3 Faults with a fault message
If a fault has occurred and has not yet been cleared:
 Status LED (1) flashes red
 A fault message is shown on the display (2)
An internal distinction is made between 3 types of message:
Warning (W) Boiler continues running
Error (E) Boiler follows shutdown procedure
Fault (F) Boiler shuts down immediately, heating circuit controls
and pumps remain active
6.3.1 Procedure for fault messages
 Find and eliminate the error.
 Acknowledge the error by pressing the
ENTER
key
 Restart the boiler with the key
1
2