4.3 Faults with fault message
If a fault has occurred and has not yet been cleared:
❒
Status LED indicates the nature of the fault
- Orange flashing: Warning
- Red flashing: Error or alarm
❒ A fault message is shown on the display
4.3.1 Procedure for fault messages
The procedure in the case of a fault message, the causes of faults and procedure for
troubleshooting are described in the operating instructions for the boiler controller:
IMPORTANT! See operating instructions for boiler controller
4.3.2 Acknowledging a fault message
Trace and remove the fault and then:
❒
Press the Enter key
➥ Status LED constant or flashing green light (depending on operating status)
- Green constant: Heating up/Heating
- Green flashing: Off
4
Troubleshooting
Faults with fault message
30 Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com
To Next Page
Loading...
Need help?
General