19
EN
Control elements and connections
General remarks
NOTE!
As a result of firmware updates, you may find that there are functions available on
your unit that are not described in these operating instructions or vice versa.
Certain illustrations may also differ slightly from the actual control elements on your device.
However, these controls function in exactly the same way.
WARNING!
Operating the equipment incorrectly can cause serious injury and damage.
► Do not use the functions described until you have thoroughly read and understood
these operating instructions
► Do not use the functions described until you have thoroughly read and understood all
the operating instructions for the system components, especially the safety rules
Control panel
No. Function
(1) Graphic display
(2) Menu key
- Select the desired setting, e.g. Ah
(3) Up/Down keys
- Select the desired operating mo-
de, e.g. 'Charging' or 'Battery ch-
anging'
- Alter the setting that has been
selected by the Menu key (2)
- After connecting to a new battery:
ability to manually select the char-
ging voltage from 6, 12 or 24 V
(4) Stop/Start key
- For interrupting and resuming charging
- Confirming selections, e.g. after the charging voltage has been selected from 6,
12 or 24 V using the Up/Down keys
(2)(1) (3) (4)
To Next Page
Loading...
